← All insights
Insights · Topic
Articles on RF Engineering
Every noIM₃ article on RF Engineering, newest first. Written by engineers, for engineers.
● 30 articles Page 5 of 5
RF Engineering What Is a Good VSWR? VSWR, Return Loss and Reflected Power Explained A good VSWR is usually 1.5:1 or better, and 2:1 is the common acceptance limit. Here is what VSWR actually measures, how it converts to return loss, reflection coefficient and reflected power, a conversion table, target values by application, and the real reasons a high VSWR matters.
RF Engineering How to Specify a Coaxial Cable for the Job A coaxial cable is not a single part number, it is a specification: impedance, loss at frequency, shielding, power, environment, and a connector chosen independently for each end. Here is how to get it right.
RF Engineering Designing Leaky Feeder Coverage for Underground Mines A working engineer's guide to leaky feeder design underground: the two loss numbers that decide every layout, how to set amplifier spacing, how to budget downlink and uplink, and how mine geometry like declines, stopes and junctions changes the answer.
RF Engineering What Is the Best Frequency for Long Range Communication? There is no single best frequency for long range communication. The right choice depends on distance, terrain, antenna size, licensing, noise floor, and required availability. Here is how to pick.
RF Engineering Path Loss, Fresnel Zones, and the 80% Rule: A Field Engineer's Refresher A practical refresher on free space path loss, the log distance model, Fresnel zones, and the two ray ground reflection effect: the four numbers every field engineer should be able to estimate before climbing a tower.
RF Engineering What Is RF Interference and Why It’s Getting Worse RF interference is becoming more common as wireless systems multiply and spectrum becomes increasingly congested. Learn what causes it, why it is worsening, and what engineers can do to mitigate it.
Newest